Davicom DM9162NP Émetteur-récepteur à puce unique à couche physique Ethernet rapide 10/100 Mbps

MII, RMII

SMT

PHY

Davicom

DM9162NP

Taiwan, China

Network Interface Adapter, Surveillance Camera, Embedded System, Ethernet Hub, Ethernet Switch

DM9162 Series

DAVICOM's DM9162/DM9162I is a industrial- temperature physical layer, low power, and single- chip 10BASE-T/100BASE-TX transceiver specifically designed for consumer electronics, industrial, and enterprise applications. Through using a CMOS process, the DM9162 has the advantage of ensuring both high performance and savings in power consumption. Through utilization of automatic media speed and protocol selection, the auto-negotiation function is strongly supported in the DM9162. Then due to the built-in wave shaping filter, the DM9162 has a significant convenience of not requiring an external filter to transport signals to the media in 10BASE-T or 100BASE-TX during Ethernet operation. Through its Media Independent Interface (MII), the DM9162 not only connects the Medium Access Control (MAC) layer but also ensure a high inter- operability and flexibility for our different vendors. In media usage applications, the DM9162 provides a direct interface either to an Unshielded Twisted Pair Category 5 Cable (UTP5) for 100BASE-TX Fast Ethernet, or an UTP5/UTP3 Cable for 10BASE-T Ethernet. The DM9162 contains the entire physical layer functions of 100BASE-TX. Those physical layer functions are defined by IEEE802.3u include the Physical Coding Sub layer (PCS), Physical Medium Attachment (PMA), Twisted Pair Physical Medium Dependent Sub layer (TP-PMD), 10BASE-TX Encoder/Decoder (ENC/DEC), and Twisted Pair Media Access Unit (TPMAU).

32-pin QFN

Fully complies with IEEE 802.3 / IEEE 802.3u 10Base-TX/100Base-TX, ANSI X3T12 TP-PMD 1995 standards, Support HP MDI/MDI-X auto crossover function (HP Auto-MDIX), Support Auto-Negotiation function, compliant with IEEE 802.3u, Fully integrated Physical layer transceiver, On-chip filtering with direct interface to magnetic transformer, Selectable repeater or node mode, Selectable MII or RMII (Reduced MII) mode for 100Base-TX and 10Base-TX, Selectable MII or GPSI (7-Wired) mode for 10Base-TX, Selectable full-duplex or half-duplex operation, MII management interface with maskable interrupt output capability, Provide Loopback mode for easy system diagnostics, Supports industrial-temperature (-40℃ ~ +85℃), LED status outputs indicate Link/Activity, Speed 10/100 and Full-duplex/Collision, Support Dual-LED optional control, Single low power supply of 3.3V with advanced CMOS technology, Built-in 3.3V to 1.8V regulator, Lower Power consumption modes: Power Reduced mode (cable detection), Power Down mode, Support 50MHz clock output in RMII mode, Compatible with 3.3V and 5.0V tolerant I/Os, DSP architecture PHY Transceiver, 48-pin LQFP

0~70

10/100Mbps

32-pin QFN

Multiple of 490

40X20X12 cm